If you had a lot of fields and collections, createClientConfig would be
extremely slow, as it was copying a lot of memory. In my test config
with a lot of fields and collections, it took 4 seconds(!!).
And not only that, it also ran between every single page navigation.
This PR significantly speeds up the createClientConfig function. In my
test config, its execution speed went from 4 seconds to 50 ms.
Additionally, createClientConfig is now properly cached in both dev &
prod. It no longer runs between every single page navigation. Even if
you trigger a full page reload, createClientConfig will be cached and
not run again. Despite that, HMR remains fully-functional.
This will make payload feel noticeably faster for large configs -
especially if it contains a lot of richtext fields, as it was previously
deep-copying the relatively large richText editor configs over and over
again.
## Before - 40 sec navigation speed
https://github.com/user-attachments/assets/fe6b707a-459b-44c6-982a-b277f6cbb73f
## After - 1 sec navigation speed
https://github.com/user-attachments/assets/384fba63-dc32-4396-b3c2-0353fcac6639
## Todo
- [x] Implement ClientSchemaMap and cache it, to remove
createClientField call in our form state endpoint
- [x] Enable schemaMap caching for dev
- [x] Cache lexical clientField generation, or add it to the parent
clientConfig
## Lexical changes
Red: old / removed
Green: new
### Speed up version queries
This PR comes with performance optimizations for fetching versions
before a document is loaded. Not only does it use the new select API to
limit the fields it queries, it also completely skips a database query
if the current document is published.
### Speed up lexical init
Removes a bunch of unnecessary deep copying of lexical objects which
caused higher memory usage and slower load times. Additionally, the
lexical default config sanitization now happens less often.
The biggest difference comes from calling `RenderServerComponent` as a
function, instead of rendering it by using `<RenderServerComponent`.
This gets rid of wasteful blocks of codes sent to the client that look
like this:
HTML size comparison:
## Admin test suite
| View | Before | After |
|------|---------|--------|
| Dashboard | 331 kB | 83 kB |
| collections/custom-views-one Edit | 285 kB | 76.6 kB |
## Fields test suite
| View | Before | After |
|------|---------|--------|
| collections/lexical Edit | 189 kB | 94.4 kB |
| collections/lexical List | 152 kB | 62.9 kB |
## Community test suite
| View | Before | After |
|------|---------|--------|
| Dashboard | 78.9 kB | 43.1 kB |
Optimizes initial page responses by removing unnecessary inline field
styles that were being sent through the HTML response. The Client Config
contains a large number of duplicates of the string:
`"style\":{\"flex\":\"1 1 auto\"}`, one for every single field within
the entirely of the config. This leads to hundreds or potentially
thousands of instances of this same string, depending on the number of
fields within the config itself. This is regardless of custom field
widths being defined. Instead, we can do this entirely client-side,
preventing this string from ever being transmitted over the network in
the first place.
## Breaking Changes
This only effects those who are importing Payload's field components
into your own Custom Components or front-end application. The `width`
prop no longer exists. It has been consolidated into the existing
`style` prop. To migrate, simply move this prop as follows:
```diff
import { TextInput } from '@payloadcms/ui
export const MyCustomComponent = () => {
return (
<TextInput
- width="60%"
style={{
+ width: "60%,
}}
/>
)
}
```
Supports bi-directional import/export between MDX <=> Lexical. JSX will
be mapped to lexical blocks back and forth.
This will allow editing our mdx docs in payload while keeping mdx as the
source of truth
---------
Co-authored-by: Germán Jabloñski <43938777+GermanJablo@users.noreply.github.com>
Protects the `/api/access` endpoint behind authentication and sanitizes
the result, making it more secure and significantly smaller. To do this:
1. The `permission` keyword is completely omitted from the result
2. Only _truthy_ access results are returned
3. All nested permissions are consolidated when possible
---------
Co-authored-by: Dan Ribbens <dan.ribbens@gmail.com>
Co-authored-by: Jacob Fletcher <jacobsfletch@gmail.com>
Co-authored-by: James <james@trbl.design>
### What?
Ensures `path` is required and only present on the fields that expect it
(all fields except row).
Deprecates `useFieldComponents` and `FieldComponentsProvider` and
instead extends the RenderField component to account for all field
types. This also improves type safety within `RenderField`.
### Why?
`path` being optional just adds DX overhead and annoyance.
### How?
Added `FieldPaths` type which is added to iterable field types. Placed
`path` back onto the ClientFieldBase type.
### What?
Removes abort controllers that were shared globally inside the server
actions provider.
### Why?
Constructing them in this way will cause different fetches using the
same function to cancel one another accidentally.
These are currently causing issues when two components call server
functions, even different functions, because the global ref inside was
being overwritten and aborting the previous one.
### How?
Standardizes how we construct and destroy abort controllers. This PR is focused around creating them to pass into the exposed serverAction provider functions. There are other places where this pattern can be applied.
This fixes a peer dependency error in our monorepo, as
eslint-plugin-jsx-a11y finally supports eslint v9.
Additionally, this officially adds TypeScript 5.6 support for
typescript-eslint.
Currently, Payload renders all custom components on initial compile of
the admin panel. This is problematic for two key reasons:
1. Custom components do not receive contextual data, i.e. fields do not
receive their field data, edit views do not receive their document data,
etc.
2. Components are unnecessarily rendered before they are used
This was initially required to support React Server Components within
the Payload Admin Panel for two key reasons:
1. Fields can be dynamically rendered within arrays, blocks, etc.
2. Documents can be recursively rendered within a "drawer" UI, i.e.
relationship fields
3. Payload supports server/client component composition
In order to achieve this, components need to be rendered on the server
and passed as "slots" to the client. Currently, the pattern for this is
to render custom server components in the "client config". Then when a
view or field is needed to be rendered, we first check the client config
for a "pre-rendered" component, otherwise render our client-side
fallback component.
But for the reasons listed above, this pattern doesn't exactly make
custom server components very useful within the Payload Admin Panel,
which is where this PR comes in. Now, instead of pre-rendering all
components on initial compile, we're able to render custom components
_on demand_, only as they are needed.
To achieve this, we've established [this
pattern](https://github.com/payloadcms/payload/pull/8481) of React
Server Functions in the Payload Admin Panel. With Server Functions, we
can iterate the Payload Config and return JSX through React's
`text/x-component` content-type. This means we're able to pass
contextual props to custom components, such as data for fields and
views.
## Breaking Changes
1. Add the following to your root layout file, typically located at
`(app)/(payload)/layout.tsx`:
```diff
/* THIS FILE WAS GENERATED AUTOMATICALLY BY PAYLOAD. */
/* DO NOT MODIFY IT BECAUSE IT COULD BE REWRITTEN AT ANY TIME. */
+ import type { ServerFunctionClient } from 'payload'
import config from '@payload-config'
import { RootLayout } from '@payloadcms/next/layouts'
import { handleServerFunctions } from '@payloadcms/next/utilities'
import React from 'react'
import { importMap } from './admin/importMap.js'
import './custom.scss'
type Args = {
children: React.ReactNode
}
+ const serverFunctions: ServerFunctionClient = async function (args) {
+ 'use server'
+ return handleServerFunctions({
+ ...args,
+ config,
+ importMap,
+ })
+ }
const Layout = ({ children }: Args) => (
<RootLayout
config={config}
importMap={importMap}
+ serverFunctions={serverFunctions}
>
{children}
</RootLayout>
)
export default Layout
```
2. If you were previously posting to the `/api/form-state` endpoint, it
no longer exists. Instead, you'll need to invoke the `form-state` Server
Function, which can be done through the _new_ `getFormState` utility:
```diff
- import { getFormState } from '@payloadcms/ui'
- const { state } = await getFormState({
- apiRoute: '',
- body: {
- // ...
- },
- serverURL: ''
- })
+ const { getFormState } = useServerFunctions()
+
+ const { state } = await getFormState({
+ // ...
+ })
```
## Breaking Changes
```diff
- useFieldProps()
- useCellProps()
```
More details coming soon.
---------
Co-authored-by: Alessio Gravili <alessio@gravili.de>
Co-authored-by: Jarrod Flesch <jarrodmflesch@gmail.com>
Co-authored-by: James <james@trbl.design>
### What?
Adds `populate` property to Local API and REST API operations that can
be used to specify `select` for a specific collection when it's
populated
```ts
const result = await payload.findByID({
populate: {
// type safe if you have generated types
posts: {
text: true,
},
},
collection: 'pages',
depth: 1,
id: aboutPage.id,
})
result.relatedPost // only has text and id properties
```
```ts
fetch('https://localhost:3000/api/pages?populate[posts][text]=true') // highlight-line
.then((res) => res.json())
.then((data) => console.log(data))
```
It also overrides
[`defaultPopulate`](https://github.com/payloadcms/payload/pull/8934)
Ensures `defaultPopulate` doesn't affect GraphQL.
### How?
Implements the property for all operations that have the `depth`
argument.
### What?
Adds `defaultPopulate` property to collection config that allows to
specify which fields to select when the collection is populated from
another document.
```ts
import type { CollectionConfig } from 'payload'
// The TSlug generic can be passed to have type safety for `defaultPopulate`.
// If avoided, the `defaultPopulate` type resolves to `SelectType`.
export const Pages: CollectionConfig<'pages'> = {
slug: 'pages',
// I need only slug, NOT the WHOLE CONTENT!
defaultPopulate: {
slug: true,
},
fields: [
{
name: 'slug',
type: 'text',
required: true,
},
],
}
```
### Why?
This is essential for example in case of links. You don't need the whole
document, which can contain large data but only the `slug`.
### How?
Implements `defaultPopulate` when populating relationships, including
inside of lexical / slate rich text fields.
I'm extending the Slate editor with a custom component and everything
works great, except I have to import `useElement()` like this:
```tsx
import { useElement } from 'node_modules/.pnpm/@payloadcms+richtext-slate@3.0.0-beta.113_monaco-editor@0.51.0_next@15.0.0-canary.191_@babel+_qmdxs6s5hpzjhuopohgawpvl6i/node_modules/@payloadcms/richtext-slate/dist/field/providers/ElementProvider.js'
export function Element() {
const { attributes, children } = useElement()
return (
<p {...attributes} className="rich-text-preheading">
{children}
</p>
)
}
```
That's because it's not in the `@payloadcms/richtext-slate/client`
module. This PR fixes this and would allow me to do:
```tsx
import { useElement } from '@payloadcms/richtext-slate/client'
```
All payload css is now encapsulated inside CSS layers under `@layer
payload-default`
Any custom css will now have the highest possible specificity.
We have also provided a new layer `@layer payload` if you want to use
layers and ensure that your styles are applied after payload.
To override existing styles in a way that the existing rules of
specificity would be respected you can use the default layer like so
```css
@layer payload-default {
// my styles within the payload specificity
}
```
