Editing fields during a locale change on slow networks can lead to
changes being reset when the new form state is returned. This is because
the fields receive new values from context when the new locale loads in,
which may have occurred _after_ changes were made to the fields. The fix
is to subscribe to a new `localeIsLoading` context which is set
immediately after changing locales, and then reset once the new locale
loads in. This also removes the misleading `@deprecated` flag from the
`useLocale` hook itself.
Previously, updates of the node fields from outside the form using
setFields did not trigger re-fetching the initial state, and thus
providing updated values to the form. This is to avoid unnecessary
re-renders of the form and unnecessary requests when setFields is
triggered from within the form.
This PR resets the initial state, thus triggering a re-render and
re-fetch of the initial state, if node.setFields is called from outside
the form. This preserves the performance optimization
Currently, unless a locale is present in the URL search params, the
locale context is instantiated using the default locale until prefs load
in client-side. This causes the locale selector to briefly render in
with the incorrect (default) locale before being replaced by the proper
locale of the request. For example, if the default locale is `en`, and
the page is requested in `es`, the locale selector will flash with
English before changing to the correct locale, even though the page data
itself is properly loaded in Spanish. This is especially evident within
slow networks.
The fix is to query the user's locale preference server-side and thread
it into the locale provider to initialize state. Because search params
are not available within server layouts, we cannot pass the locale param
in the same way, so we rely on the provider itself to read them from the
`useSearchParams` hook. If present, this takes precedence over the
user's preference if it exists.
Since the root page also queries the user's locale preference to
determine the proper locale across navigation, we use React's cache
function to dedupe these function calls and ensure only a single query
is made to the db for each request.
The localization e2e test is notorious for flaking, consuming a lot of
time and resources continually retrying. This was because the test was
attempting to click DOM elements using selectors that never resolve, or
attempting to click inaccessible DOM nodes such as those behind a modal.
The fix is to ensure that the dot nav, for example, is disabled while
form state loads, and that modals are properly closed prior to executing
subsequent tests, etc. Tests also needed to explicitly check for
_enabled_ states before performing click actions, rather than simply
awaiting their visibility.
Fixes#10018. When toggling columns, then sorting them, the table is
reset to the collection's default columns instead of the user's
preferred columns. This is because when sorting columns, a stale
client-side cache of the user's preferences is used to update their sort
preference. This is because when column state is constructed
server-side, it completely bypasses the client-side cache. To fix this,
sort preferences are now also set on the server right alongside column
preferences, which performs an upsert-like operation to ensure that no
existing preferences are lost.
<!--
Thank you for the PR! Please go through the checklist below and make
sure you've completed all the steps.
Please review the
[CONTRIBUTING.md](https://github.com/payloadcms/payload/blob/main/CONTRIBUTING.md)
document in this repository if you haven't already.
The following items will ensure that your PR is handled as smoothly as
possible:
- PR Title must follow conventional commits format. For example, `feat:
my new feature`, `fix(plugin-seo): my fix`.
- Minimal description explained as if explained to someone not
immediately familiar with the code.
- Provide before/after screenshots or code diffs if applicable.
- Link any related issues/discussions from GitHub or Discord.
- Add review comments if necessary to explain to the reviewer the logic
behind a change
-->
### What?
This patch implements the functionality in `imageResizer` to omit the
generation of the image when either width or height is undefined and
`withoutEnlargement` is set to `undefined`
### Why?
#9986: `withoutEnlargement` doesn't work when `height` is undefined in
`upload.imageSizes`
### How?
This code checks if `withoutEnlargement` is undefined and either
`targetWidth` or `targetHeight` is missing. If so, it further checks
whether the target dimensions (if provided) are larger than the original
image dimensions. If the target would enlarge the image, it returns
'omit', skipping the resizing to prevent enlargement
Fixes#9986
---------
Co-authored-by: Patrik Kozak <patrik@payloadcms.com>
To reproduce the bug:
1. Within a Lexical editor, insert a relationship field.
2. In the drawer, change the selected collection.
3. The table below changes correctly, but the title and the "create new"
button quickly revert to the original option.
https://github.com/user-attachments/assets/e4b7c615-4b98-4c11-a4b9-a828606edb6f
<!--
Thank you for the PR! Please go through the checklist below and make
sure you've completed all the steps.
Please review the
[CONTRIBUTING.md](https://github.com/payloadcms/payload/blob/main/CONTRIBUTING.md)
document in this repository if you haven't already.
The following items will ensure that your PR is handled as smoothly as
possible:
- PR Title must follow conventional commits format. For example, `feat:
my new feature`, `fix(plugin-seo): my fix`.
- Minimal description explained as if explained to someone not
immediately familiar with the code.
- Provide before/after screenshots or code diffs if applicable.
- Link any related issues/discussions from GitHub or Discord.
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Fixes #
-->
Fixes#9882 and #9691
In 2.0, we would accept data coming back from an update operation and
then reflect those changes in UI.
However, in 3.0, we did not do that anymore - meaning you could change a
document with hooks in `beforeChange` or `afterChange`, but then not see
the changes made on the server.
This PR updates the way that `mergeServerFormState` works, and adds a
property to optionally allow values from server form state - which can
then be used in the `onSuccess` form handler which may need to define
new field values.
Allows to set `maxDepth: 0` for join fields and improves JSDoc about
`maxDepth`, adds tests to confirm that
https://github.com/payloadcms/payload/issues/10243 is not an issue, but
just happens because the default `maxDepth` is `1`.
Similar to #10331. Since React 19, refs can now be passed directly
through props without the need for `React.forwardRef`. This greatly
simplifies components types and overall syntax.
This PR adds a button to the `/account` view which allows users to reset
their preferences on-demand. This is to that editors can quickly reset their
preferences via the admin ui without the need of accessing the db directly,
which was simply not possible before. To do this, we add a new button at
the bottom of the account view which performs a standard `DELETE`
request using the REST API to the `'payload-preferences'` collection.
Related: #9949
Demo: [Posts-reset-prefs--Payload.webm](https://github.com/user-attachments/assets/560cbbe3-06ef-4b7c-b3c2-9702883b1fc6)
Whenever form state fails, like when field conditions, validations, or
default value functions throw errors, blocks and array rows are stuck
within an infinite loading state. Examples of this might be when
accessing properties of undefined within these functions, etc. Although
these errors are logged to the server console, the UI is be misleading,
where the user often waits for the request to resolve rather than
understanding that an underlying API error has occurred. Now, we safely
execute these functions within a `try...catch` block and handle their
failures accordingly. On the client, form state will resolve as expected
using the default return values for these functions.
### What?
Previously, while uploading a file - if the uploading process took a bit
of time, users could still save the document prior to the upload fully
completing.
### Why?
During the uploading process - the save button should be disabled until
the upload is complete to prevent premature saving of an upload
document.
### How?
Now, we keep track of the state of the upload in a provider and disable
the save button until the file is fully uploaded.
Fixes an issue where if a checkbox field was in the first position of a
collection, and you tried to filter on it via the List view, the page
would crash.
Fixes#10234. Some fields, such as focal point fields for upload enabled
collections, were rendering in the condition selector despite being
hidden from the column selector. This was because the logic for the
column selector was filtering fields without labels, but the same was
not being done for the filter conditions. This, however, is not a good
way to filter these fields as it requires this specific logic to be
written in multiple places. Instead, they need to explicitly check for
`hidden` and `disabled` in addition to `disableListFilter` and
`disableListColumn`. The actual filtering logic has been improved across
the two instances as well, removing multiple duplicative loops.
This change has also exposed a underlying issue with the way columns
were handled within the table columns provider. When row selections were
enabled, the selector columns were present in column state. This caused
problems when interacting with column indices, such as when reordering
columns. Instead of needing to manually filter these out every time we
need to work with column state, they no longer appear there in the first
place. Instead, we inject the row selectors directly into the table
itself, completely isolating these row selectors from the column state.
There were a handful of list view e2e tests written into the text and
email field test suite, making them hard to find as they were isolated
from other related tests. A few of these tests were also duplicative
across suites, making CI run them twice unnecessarily.
Bumps Next.js to the latest version `15.1.3`. This affects only internal
`package.json` files (in the root dir and test)
Fixes errors from here https://github.com/payloadcms/payload/pull/10209
Improves the admin e2e test splitting by grouping them by type with
semantic names as opposed to numerically. This will provide much needed
clarity to exactly _where_ new admin tests should be written and help to
quickly distinguish the areas of failure within the CI overview.
Adds a feature to allow editors to schedule publish / unpublish events
in the future. Must be enabled by setting
`versions.drafts.schedulePublish: true` in your Collection / Global
configs.
https://github.com/user-attachments/assets/ca1d7a8b-946a-4eac-b911-c2177dbe3b1c
Todo:
- [x] Translate new i18n keys
- [x] Wire up locale-specific scheduled publish / unpublish actions
When using various controls within the List View, those selections are
sometimes not persisted. This is especially evident when selecting
`perPage` from the List View, where the URL and UI would reflect this
selection, but the controls would be stale. Similarly, after changing
`perPage` then navigating to another page through the pagination
controls, `perPage` would reset back to the original value. Same with
the sort controls, where sorting by a particular column would not be
reflected in the UI. This was because although we modify the URL search
params and fire off a new query with those changes, we were not updating
local component state.
Based on https://github.com/payloadcms/payload/pull/10154
If the actual database schema is not changed (no new columns, enums,
indexes, tables) - skip calling Drizzle push. This, potentially can
significantly reduce overhead on reloads in development mode especially
when using remote databases.
If for whatever reason you need to preserve the current behavior you can
use `PAYLOAD_FORCE_DRIZZLE_PUSH=true` env flag.
Fixes#10180. When logged in as an unauthorized user who cannot access
the admin panel, the user is unable to log out through the prompted
`/admin/logout` page. This was because that page was using an incorrect
API endpoint, reading from `admin.user` instead of `user.collection`
when formatting the route. This page was also able to get stuck in an
infinite loading state when attempting to log out without any user at
all. Now, public users can properly log out and then back in with
another user who might have access. The messaging around this was also
misleading. Instead of displaying the "Unauthorized, you must be logged
in to make this request" message, we now display a new "Unauthorized,
this user does not have access to the admin panel" message for added
clarity.
### What?
With Postgres, before join to self like:
```ts
import type { CollectionConfig } from 'payload'
export const SelfJoins: CollectionConfig = {
slug: 'self-joins',
fields: [
{
name: 'rel',
type: 'relationship',
relationTo: 'self-joins',
},
{
name: 'joins',
type: 'join',
on: 'rel',
collection: 'self-joins',
},
],
}
```
wasn't possible, even though it's a valid usage.
### How?
Now, to differentiate parent `self_joins` and children `self_joins` we
do additional alias for the nested select -
`"4d3cf2b6_1adf_46a8_b6d2_3e1c3809d737"`:
```sql
select
"id",
"rel_id",
"updated_at",
"created_at",
(
select
coalesce(
json_agg(
json_build_object('id', "joins_alias".id)
),
'[]' :: json
)
from
(
select
"created_at",
"rel_id",
"id"
from
"self_joins" "4d3cf2b6_1adf_46a8_b6d2_3e1c3809d737"
where
"4d3cf2b6_1adf_46a8_b6d2_3e1c3809d737"."rel_id" = "self_joins"."id"
order by
"4d3cf2b6_1adf_46a8_b6d2_3e1c3809d737"."created_at" desc
limit
$1
) "joins_alias"
) as "joins_alias"
from
"self_joins"
where
"self_joins"."id" = $2
order by
"self_joins"."created_at" desc
limit
$3
```
Fixes https://github.com/payloadcms/payload/issues/10144
-->
Fixes#10070. Adding new blocks or array rows can randomly get stuck
within an infinite loading state. This was because the abort controllers
responsible for disregarding duplicate `onChange` and `onSave` events
was not properly resetting its refs across invocations. This caused
subsequent event handlers to incorrectly abort themselves, leading to
unresolved requests and a `null` form state. Similarly, the cleanup
effects responsible for aborting these requests on component unmount
were also referencing its `current` property directly off the refs,
which can possible be stale if not first set as a variable outside the
return function.
This PR also carries over some missing `onSave` logic from the default
edit view into the live preview view. In the future the logic between
these two views should be standardized, as they're nearly identical but
often become out of sync. This can likely be done through the use of
reusable hooks, such as `useOnSave`, `useOnChange`, etc. Same with the
document locking functionality which is complex and deeply integrated
into each of these views.
Live Preview message events were typed with the generic `MessageEvent`
interface without passing any of the Live Preview specific properties,
leading to unknown types upon use. To fix this, there is a new
`LivePreviewMessageEvent` which properly extends the underlying
`MessageEvent` interface, providing much needed type safety to these
functions. In the same vein, the `UpdatedDocument` type was not being
properly shared across packages, leading to multiple independent
definitions of this type. This type is now exported from `payload`
itself and renamed to `DocumentEvent` for improved semantics. Same with
the `FieldSchemaJSON` type. This PR also adjusts where globally scoped
variables are set, putting them within the shared `_payloadLivePreview`
namespace instead of setting them individually at the top-level.
<!--
Thank you for the PR! Please go through the checklist below and make
sure you've completed all the steps.
Please review the
[CONTRIBUTING.md](https://github.com/payloadcms/payload/blob/main/CONTRIBUTING.md)
document in this repository if you haven't already.
The following items will ensure that your PR is handled as smoothly as
possible:
- PR Title must follow conventional commits format. For example, `feat:
my new feature`, `fix(plugin-seo): my fix`.
- Minimal description explained as if explained to someone not
immediately familiar with the code.
- Provide before/after screenshots or code diffs if applicable.
- Link any related issues/discussions from GitHub or Discord.
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Fixes #
-->
### What?
This PR fixes an issue where assigning a label or description function
to a tab would cause a runtime error due to passing a function to a
client component.
### Why?
To prevent runtime errors when using non-static designations.
### How?
By properly evaluating label and description functions prior to
assignment to their `clientTab` counterpart.
Fixes#10114
Before:
After:
<!--
Thank you for the PR! Please go through the checklist below and make
sure you've completed all the steps.
Please review the
[CONTRIBUTING.md](https://github.com/payloadcms/payload/blob/main/CONTRIBUTING.md)
document in this repository if you haven't already.
The following items will ensure that your PR is handled as smoothly as
possible:
- PR Title must follow conventional commits format. For example, `feat:
my new feature`, `fix(plugin-seo): my fix`.
- Minimal description explained as if explained to someone not
immediately familiar with the code.
- Provide before/after screenshots or code diffs if applicable.
- Link any related issues/discussions from GitHub or Discord.
- Add review comments if necessary to explain to the reviewer the logic
behind a change
### What?
### Why?
### How?
Fixes #
-->
### What?
This PR fixes an issue where deleting an entry in a `Join` via the
`Drawer` accessed through the `DrawerLink` would not update the table
until the page was refreshed.
### Why?
For a better, more reactive, deletion experience for end-users. Ideally,
the deletion is reflected in the table right away.
### How?
By passing an `onDrawerDelete` function to the `DrawerLink` which simply
filters out the existing doc according to an id.
Fixes#9580
Before:
[Editing---Post--before-Payload.webm](https://github.com/user-attachments/assets/3dd4df78-bb63-46b1-bf5f-7643935e15ad)
After:
[Editing---Post--after-Payload.webm](https://github.com/user-attachments/assets/97bb604f-41df-4cc9-8c46-9a59a19c72b7)
IDs that are supplied directly through the API, such as client-side
generated IDs when adding new blocks and array rows, are overwritten on
create. This is because when adding blocks or array rows on the client,
their IDs are generated first before being sent to the server for
processing. Then when the server receives this data, it incorrectly
overrides them to ensure they are unique when using relational DBs. But
this only needs to happen when no ID was supplied on create, or
specifically when duplicating documents via the `beforeDuplicate` hook.
### What?
Exposes ability to enable
[AUTOINCREMENT](https://www.sqlite.org/autoinc.html) for Primary Keys
which ensures that the same ID cannot be reused from previously deleted
rows.
```ts
sqliteAdapter({
autoIncrement: true
})
```
### Why?
This may be essential for some systems. Enabled `autoIncrement: true`
also for the SQLite Adapter in our tests, which can be useful when
testing whether the doc was deleted or not when you also have other
create operations.
### How?
Uses Drizzle's `autoIncrement` option.
WARNING:
This cannot be enabled in an existing project without a custom
migration, as it completely changes how primary keys are stored in the
database.
* Avoids additional file system writes (1 for `await writeFile` and then
`npx prettier --write`) instead prettier now formats the javascript
string directly. Went from 650 MS to 250 MS for the prettify block.
* Disables database connection, since the `db.generateSchema` doesn't
need connection, this also disables Drizzle schema push.
* Properly exits the bin script process.
### What?
The join field had a limitation imposed that prevents it from targeting
polymorphic relationship fields. With this change we can support any
relationship fields.
### Why?
Improves the functionality of join field.
### How?
Extended the database adapters and removed the config sanitization that
would throw an error when polymorphic relationships were used.
Fixes #
