Editing fields during a locale change on slow networks can lead to
changes being reset when the new form state is returned. This is because
the fields receive new values from context when the new locale loads in,
which may have occurred _after_ changes were made to the fields. The fix
is to subscribe to a new `localeIsLoading` context which is set
immediately after changing locales, and then reset once the new locale
loads in. This also removes the misleading `@deprecated` flag from the
`useLocale` hook itself.
Fixes#10180. When logged in as an unauthorized user who cannot access
the admin panel, the user is unable to log out through the prompted
`/admin/logout` page. This was because that page was using an incorrect
API endpoint, reading from `admin.user` instead of `user.collection`
when formatting the route. This page was also able to get stuck in an
infinite loading state when attempting to log out without any user at
all. Now, public users can properly log out and then back in with
another user who might have access. The messaging around this was also
misleading. Instead of displaying the "Unauthorized, you must be logged
in to make this request" message, we now display a new "Unauthorized,
this user does not have access to the admin panel" message for added
clarity.
If you had a lot of fields and collections, createClientConfig would be
extremely slow, as it was copying a lot of memory. In my test config
with a lot of fields and collections, it took 4 seconds(!!).
And not only that, it also ran between every single page navigation.
This PR significantly speeds up the createClientConfig function. In my
test config, its execution speed went from 4 seconds to 50 ms.
Additionally, createClientConfig is now properly cached in both dev &
prod. It no longer runs between every single page navigation. Even if
you trigger a full page reload, createClientConfig will be cached and
not run again. Despite that, HMR remains fully-functional.
This will make payload feel noticeably faster for large configs -
especially if it contains a lot of richtext fields, as it was previously
deep-copying the relatively large richText editor configs over and over
again.
## Before - 40 sec navigation speed
https://github.com/user-attachments/assets/fe6b707a-459b-44c6-982a-b277f6cbb73f
## After - 1 sec navigation speed
https://github.com/user-attachments/assets/384fba63-dc32-4396-b3c2-0353fcac6639
## Todo
- [x] Implement ClientSchemaMap and cache it, to remove
createClientField call in our form state endpoint
- [x] Enable schemaMap caching for dev
- [x] Cache lexical clientField generation, or add it to the parent
clientConfig
## Lexical changes
Red: old / removed
Green: new
### Speed up version queries
This PR comes with performance optimizations for fetching versions
before a document is loaded. Not only does it use the new select API to
limit the fields it queries, it also completely skips a database query
if the current document is published.
### Speed up lexical init
Removes a bunch of unnecessary deep copying of lexical objects which
caused higher memory usage and slower load times. Additionally, the
lexical default config sanitization now happens less often.
The field RSC now provides an initial state for all lexical blocks. This
completely obliterates any flashes and lexical block loading states when
loading or saving a document.
Previously, when a document is loaded or saved, every lexical block was
sending a network request in order to fetch their form state. Now, this
is batched and handled in the lexical server component. All lexical
block form states are sent to the client together with the parent
lexical field, and are thus available immediately.
We also do the same with block collapsed preferences. Thus, there are no
loading states or layout shifts/flashes of blocks anymore.
Additionally, when saving a document while your cursor is inside a
lexical field, the cursor position is preserved. Previously, a document
save would kick your cursor out of the lexical field.
## Look at how nice this is:
https://github.com/user-attachments/assets/21d736d4-8f80-4df0-a782-7509edd993da
**BREAKING:**
This removes the `feature.hooks.load` and `feature.hooks.save`
interfaces from custom lexical features, as they weren't used internally
and added unnecessary, additional overhead.
If you have custom features that use those, you can migrate to using
normal payload hooks that run on the server instead of the client.
Live preview e2e tests had no CSS when tested against prod.
For all our other tests, we have a separate test/app directory that
imports CSS. Otherwise, the root-level /app directory is used.
For live-preview, we currently always run against test/live-preview/app,
that has no CSS import.
This PR adds a new test/live-preview/prod/app directory that imports CSS
and is used when we run tests against prod.
In order for this to work, I had to make import map generation smarter
Currently, Payload renders all custom components on initial compile of
the admin panel. This is problematic for two key reasons:
1. Custom components do not receive contextual data, i.e. fields do not
receive their field data, edit views do not receive their document data,
etc.
2. Components are unnecessarily rendered before they are used
This was initially required to support React Server Components within
the Payload Admin Panel for two key reasons:
1. Fields can be dynamically rendered within arrays, blocks, etc.
2. Documents can be recursively rendered within a "drawer" UI, i.e.
relationship fields
3. Payload supports server/client component composition
In order to achieve this, components need to be rendered on the server
and passed as "slots" to the client. Currently, the pattern for this is
to render custom server components in the "client config". Then when a
view or field is needed to be rendered, we first check the client config
for a "pre-rendered" component, otherwise render our client-side
fallback component.
But for the reasons listed above, this pattern doesn't exactly make
custom server components very useful within the Payload Admin Panel,
which is where this PR comes in. Now, instead of pre-rendering all
components on initial compile, we're able to render custom components
_on demand_, only as they are needed.
To achieve this, we've established [this
pattern](https://github.com/payloadcms/payload/pull/8481) of React
Server Functions in the Payload Admin Panel. With Server Functions, we
can iterate the Payload Config and return JSX through React's
`text/x-component` content-type. This means we're able to pass
contextual props to custom components, such as data for fields and
views.
## Breaking Changes
1. Add the following to your root layout file, typically located at
`(app)/(payload)/layout.tsx`:
```diff
/* THIS FILE WAS GENERATED AUTOMATICALLY BY PAYLOAD. */
/* DO NOT MODIFY IT BECAUSE IT COULD BE REWRITTEN AT ANY TIME. */
+ import type { ServerFunctionClient } from 'payload'
import config from '@payload-config'
import { RootLayout } from '@payloadcms/next/layouts'
import { handleServerFunctions } from '@payloadcms/next/utilities'
import React from 'react'
import { importMap } from './admin/importMap.js'
import './custom.scss'
type Args = {
children: React.ReactNode
}
+ const serverFunctions: ServerFunctionClient = async function (args) {
+ 'use server'
+ return handleServerFunctions({
+ ...args,
+ config,
+ importMap,
+ })
+ }
const Layout = ({ children }: Args) => (
<RootLayout
config={config}
importMap={importMap}
+ serverFunctions={serverFunctions}
>
{children}
</RootLayout>
)
export default Layout
```
2. If you were previously posting to the `/api/form-state` endpoint, it
no longer exists. Instead, you'll need to invoke the `form-state` Server
Function, which can be done through the _new_ `getFormState` utility:
```diff
- import { getFormState } from '@payloadcms/ui'
- const { state } = await getFormState({
- apiRoute: '',
- body: {
- // ...
- },
- serverURL: ''
- })
+ const { getFormState } = useServerFunctions()
+
+ const { state } = await getFormState({
+ // ...
+ })
```
## Breaking Changes
```diff
- useFieldProps()
- useCellProps()
```
More details coming soon.
---------
Co-authored-by: Alessio Gravili <alessio@gravili.de>
Co-authored-by: Jarrod Flesch <jarrodmflesch@gmail.com>
Co-authored-by: James <james@trbl.design>
Fixes https://github.com/payloadcms/payload/issues/8470
Cleans up the way we redirect and where it happens.
## Improvements
- When you verify, the admin panel will display a toast when it
redirects you to the login route. This is contextually helpful as to
what is happening.
- Removes dead code path, as we always set the _verifiedToken to null
after it is used.
## `handleAdminPage` renamed to `getRouteInfo`
This function no longer handles routing. It kicks that responsibility
back up to the initPage function.
## `isAdminAuthRoute` renamed to `isPublicAdminRoute`
This was inversely named as it determines if a given route is public.
Also simplifies deterministic logic here.
## `redirectUnauthenticatedUser` argument
This is no longer used or needed. We can determine these things by using
the `isPublicAdminRoute` function.
## View Style fixes
- Reset Password
- Forgot Password
- Unauthorized
Fixes https://github.com/payloadcms/payload/issues/8013
**BREAKING:**
- Upgrades minimum supported @types/react version from
npm:types-react@19.0.0-rc.0 to npm:types-react@19.0.0-rc.1
- Upgrades minimum supported @types/react-dom version from
npm:types-react-dom@19.0.0-rc.0 to npm:types-react-dom@19.0.0-rc.1
- Upgrades minimum supported react and react-dom version from
19.0.0-rc-06d0b89e-20240801 to 19.0.0-rc-5dcb0097-20240918
- Upgrades minimum supported Next.js version from 15.0.0-canary.104 to
15.0.0-canary.160
---------
Co-authored-by: PatrikKozak <patrik@payloadcms.com>
Co-authored-by: Jacob Fletcher <jacobsfletch@gmail.com>
## Description
- Adds a new "join" field type to Payload and is supported by all database adapters
- The UI uses a table view for the new field
- `db-mongodb` changes relationships to be stored as ObjectIDs instead of strings (for now querying works using both types internally to the DB so no data migration should be necessary unless you're querying directly, see breaking changes for details
- Adds a reusable traverseFields utility to Payload to make it easier to work with nested fields, used internally and for plugin maintainers
```ts
export const Categories: CollectionConfig = {
slug: 'categories',
fields: [
{
name: 'relatedPosts',
type: 'join',
collection: 'posts',
on: 'category',
}
]
}
```
BREAKING CHANGES:
All mongodb relationship and upload values will be stored as MongoDB ObjectIDs instead of strings going forward. If you have existing data and you are querying data directly, outside of Payload's APIs, you get different results. For example, a `contains` query will no longer works given a partial ID of a relationship since the ObjectID requires the whole identifier to work.
---------
Co-authored-by: Jacob Fletcher <jacobsfletch@gmail.com>
Co-authored-by: James <james@trbl.design>
## Description
### TL;DR:
It's currently not possible to render our field components from a server
component because their `field` prop is the original field config, not
the _client_ config which our components require. Currently, the `field`
prop passed into custom fields changes type depending on whether it's a
server or client component, leaving server components without any access
to the client field config or mechanism to acquire it.
This PR passes the client config to all server field components through
a new `clientField` prop. This allows the following in a server
component, which is very similar to how client field components
currently work:
Server component:
```tsx
import { TextField } from '@payloadcms/ui'
import type { TextFieldServerComponent } from 'payload'
export const MyCustomServerField: TextFieldServerComponent = ({ clientField }) => {
return <TextField field={clientField} />
}
```
Client component:
```tsx
'use client'
import { TextField } from '@payloadcms/ui'
import type { TextFieldClientComponent } from 'payload'
export const MyCustomClientField: TextFieldClientComponent = ({ field }) => {
return <TextField field={field} />
}
```
### Full Background
If you have a custom field component, and it's a server component, there
is currently no way to pass the field prop into Payload's client-side
field components.
Here's an example of the problem:
```tsx
import { TextField } from '@payloadcms/ui'
import type { TextFieldServerComponent } from 'payload'
import React from 'react'
export const MyServerComponent: TextFieldServerComponent = (props) => {
const { field } = props
return (
<TextField field={field} /> // This is not possible
)
}
```
The config needs to be transformed into a client config, however,
because of the sheer number of hard-to-find arguments that the
`createClientField` requires, we cannot use it in its raw form.
Here is another example of the problem:
```tsx
import { TextField } from '@payloadcms/ui'
import { createClientField } from '@payloadcms/ui/utilities/createClientField'
import type { TextFieldServerComponent } from 'payload'
import React from 'react'
export const MyServerComponent: TextFieldServerComponent = ({ createClientField }) => {
const clientField = createClientField({...}) // Not a good option bc it requires many hard-to-find args
return (
<TextField field={clientField} />
)
}
```
Theoretically, we could preformat a `createFieldConfig` function so it
can simply be called without arguments:
```tsx
import { TextField } from '@payloadcms/ui'
import type { TextFieldServerComponent } from 'payload'
import React from 'react'
export const MyServerComponent: TextFieldServerComponent = ({ createClientField }) => {
return <TextField field={createClientField()} />
}
```
But this means the field config would be evaluated twice unnecessarily,
including label functions, etc.
The right way to fix this is to simply pass the client config to server
components through a new `clientField` prop:
```tsx
import { TextField } from '@payloadcms/ui'
import type { TextFieldServerComponent } from 'payload'
import React from 'react'
export const MyServerComponent: TextFieldServerComponent = ({ clientField }) => {
return <TextField field={clientField} />
}
```
- [x] I have read and understand the
[CONTRIBUTING.md](https://github.com/payloadcms/payload/blob/main/CONTRIBUTING.md)
document in this repository.
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## Checklist:
- [x] Existing test suite passes locally with my changes
- [x] I have made corresponding changes to the documentation
## Description
Currently, you cannot create, delete, or duplicate documents within the
document drawer directly. To create a document within a relationship
field, for example, you must first navigate to the parent field and open
the "create new" drawer. Similarly (but worse), to duplicate or delete a
document, you must _navigate to the parent document to perform these
actions_ which is incredibly disruptive to the content editing workflow.
This becomes especially apparent within the relationship field where you
can edit documents inline, but cannot duplicate or delete them. This PR
supports all document-level actions within the document drawer so that
these actions can be performed on-the-fly without navigating away.
Inline duplication flow on a polymorphic "hasOne" relationship:
https://github.com/user-attachments/assets/bb80404a-079d-44a1-b9bc-14eb2ab49a46
Inline deletion flow on a polymorphic "hasOne" relationship:
https://github.com/user-attachments/assets/10f3587f-f70a-4cca-83ee-5dbcad32f063
- [x] I have read and understand the
[CONTRIBUTING.md](https://github.com/payloadcms/payload/blob/main/CONTRIBUTING.md)
document in this repository.
## Type of change
- [x] New feature (non-breaking change which adds functionality)
## Checklist:
- [x] I have added tests that prove my fix is effective or that my
feature works
- [x] Existing test suite passes locally with my changes
We are now bumping up the Next canary version to `15.0.0-canary.104` and
`react` and `react-dom` to `^19.0.0-rc-06d0b89e-20240801`.
Your new dependencies should look like this:
```
"next": "15.0.0-canary.104",
"react": "^19.0.0-rc-06d0b89e-20240801",
"react-dom": "^19.0.0-rc-06d0b89e-20240801",
```
---------
Co-authored-by: Alessio Gravili <alessio@gravili.de>
Opts to use links instead of router.replace when switching locales. The
main benefit is now the user will be warned if they have changes and
want to switch locales. Before it would switch locales and they would
lose any unsaved changes in the locale they came from.
# Breaking Changes
### New file import locations
Exports from the `payload` package have been _significantly_ cleaned up.
Now, just about everything is able to be imported from `payload`
directly, rather than an assortment of subpath exports. This means that
things like `import { buildConfig } from 'payload/config'` are now just
imported via `import { buildConfig } from 'payload'`. The mental model
is significantly simpler for developers, but you might need to update
some of your imports.
Payload now exposes only three exports:
1. `payload` - all types and server-only Payload code
2. `payload/shared` - utilities that can be used in either the browser
or in Node environments
3. `payload/node` - heavy utilities that should only be imported in Node
scripts and never be imported into bundled code like Next.js
### UI library pre-bundling
With this release, we've dramatically sped up the compile time for
Payload by pre-bundling our entire UI package for use inside of the
Payload admin itself. There are new exports that should be used within
Payload custom components:
1. `@payloadcms/ui/client` - all client components
2. `@payloadcms/ui/server` - all server components
For all of your custom Payload admin UI components, you should be
importing from one of these two pre-compiled barrel files rather than
importing from the more deeply nested exports directly. That will keep
compile times nice and speedy, and will also make sure that the bundled
JS for your admin UI is kept small.
For example, whereas before, if you imported the Payload `Button`, you
would have imported it like this:
```ts
import { Button } from '@payloadcms/ui/elements/Button'
```
Now, you would import it like this:
```ts
import { Button } from '@payloadcms/ui/client'
```
This is a significant DX / performance optimization that we're pretty
pumped about.
However, if you are importing or re-using Payload UI components
_outside_ of the Payload admin UI, for example in your own frontend
apps, you can import from the individual component exports which will
make sure that the bundled JS is kept to a minimum in your frontend
apps. So in your own frontend, you can continue to import directly to
the components that you want to consume rather than importing from the
pre-compiled barrel files.
Individual component exports will now come with their corresponding CSS
and everything will work perfectly as-expected.
### Specific exports have changed
- `'@payloadcms/ui/templates/Default'` and
`'@payloadcms/ui/templates/Minimal`' are now exported from
`'@payloadcms/next/templates'`
- Old: `import { LogOut } from '@payloadcms/ui/icons/LogOut'` new:
`import { LogOutIcon } from '@payloadcms/ui/icons/LogOut'`
## Background info
In effort to make local dev as fast as possible, we need to import as
few files as possible so that the compiler has less to process. One way
we've achieved this in the Admin Panel was to _remove_ all .scss imports
from all components in the `@payloadcms/ui` module using a build
process. This stripped all `import './index.scss'` statements out of
each component before injecting them into `dist`. Instead, it bundles
all of the CSS into a single `main.css` file, and we import _that_ at
the root of the app.
While this concept is _still_ the right solution to the problem, this
particular approach is not viable when using these components outside
the Admin Panel, where not only does this root stylesheet not exist, but
where it would also bloat your app with unused styles. Instead, we need
to _keep_ these .scss imports in place so they are imported directly
alongside your components, as expected. Then, we need create a _new_
build step that _separately_ compiles the components _without_ their
stylesheets—this way your app can consume either as needed from the new
`client` and `server` barrel files within `@payloadcms/ui`, i.e. from
within `@payloadcms/next` and all other admin-specific packages and
plugins.
This way, all other applications will simply import using the direct
file paths, just as they did before. Except now they come with
stylesheets.
And we've gotten a pretty awesome initial compilation performance boost.
---------
Co-authored-by: James <james@trbl.design>
Co-authored-by: Alessio Gravili <alessio@gravili.de>
**BREAKING:** We now export toast from `sonner` instead of
`react-toastify`. If you send out toasts from your own projects, make
sure to use our `toast` export, or install `sonner`. React-toastify
toasts will no longer work anymore. The Toast APIs are mostly similar,
but there are some differences if you provide options to your toast
CSS styles have been changed from Toastify
```css
/* before */
.Toastify
/* current */
.payload-toast-container
.payload-toast-item
.payload-toast-close-button
/* individual toast items will also have these classes depending on the state */
.toast-info
.toast-warning
.toast-success
.toast-error
```
https://github.com/payloadcms/payload/assets/70709113/da3e732e-aafc-4008-9469-b10f4eb06b35
---------
Co-authored-by: Paul Popus <paul@nouance.io>
## Description
Allows draft validation to be enabled at the config level.
You can enable this by:
```ts
// ...collectionConfig
versions: {
drafts: {
validate: true // defaults to false
}
}
```
* fix: only execute onChange if form modified
* fix: move document loading logic from RSC to DocumentInfoProvider
* fix: make it work for globals
* chore: remove unnecessary diffs
---------
Co-authored-by: Jarrod Flesch <jarrodmflesch@gmail.com>
* wip moves payload, user and data into partial req
* chore: adjust req type
* chore(next): installs sass and resolves type errors
* feat: working login route/view
* fix: me route
* chore(next): scaffolds access routes (#4562)
* chore(next): scaffolds admin layout and dashboard view (#4566)
* chore(next): builds initPage utility (#4589)
* feat(3.0): next route handlers (#4590)
* chore: removes old files
* chore(next): ssr list view (#4594)
* chore: removes old files
* chore: adjusts graphql file imports to align with new operation exports
* chore: allows for custom endpoints
* chore: cleanup
* chore(next): ssr edit view (#4614)
* chore(ui): ssr main nav (#4619)
* chore(next): ssr account view (#4620)
* chore(next): ssr auth views and document create (#4631)
* chore(next): ssr globals view (#4640)
* chore(next): scaffolds document layout (#4644)
* chore(next): ssr versions view (#4645)
* chore(next): ssr field conditions (#4675)
* chore(next): ssr field validations (#4700)
* chore(next): moves dashboard view into next dir
* chore(next): moves account view into next dir
* chore(next): moves global edit view into next dir
* chore(next): returns isolated configs and locale from initPage
* chore(next): ssr api view (#4721)
* feat: adds i18n functionality within Rest API, Local and Client contexts (#4749)
* chore: separate client translation groups with empty line
* chore: add missing translation used in db adapters
* chore: simplify next/routes export and import paths
* chore: renames PayloadT to Payload
* chore(next): custom views (#4748)
* chore: fix translation tsconfig
* chore: adjust other package ts-configs that rely on translations
* chore(next): installs @payloadcms/ui as direct dependency
* chore(next): progress to build
* chore(next): migrates types (#4792)
* fixes acccept-language detection
* chore(next): moves remaining components out from payload core (#4794)
* chore(deps): removes all unused dependencies from payload core (#4797)
* chore(next): achieves buildable state (#4803)
* adds Translation component and removes more react-i18next
* fixes up remaining translation strings
* fixes a few i18n TODO's
* chore: remaining translation strings without colons
* chore: adds missing ja translations
* chore(next): ssr group field (#4830)
* chore: removes placeholder t function
* chore: removes old file
* chore(bundler-webpack): removes webpack bundler
* chore(bundler-vite): removes vite bundler
* chore(next): ssr tabs field (#4863)
* chore(next): ssr row field
* chore(next): ssr textarea field
* chore(next): wires server action into document edit view (#4873)
* chore(next): conditional logic (#4880)
* chore(next): ssr radio, point, code, json, ui, and hidden fields (#4891)
* chore(next): ssr collapsible field (#4894)
* chore: remove findByID from req
* chore: adjusts file property on request type
* comment clarification
* chore: wires up busboy with Requst readstream
* chore: ports over express-fileupload into a NextJS compatible format
* chore: adjust upload file structure
* chore: adds try/catch around routes, corrects a few route responses
* chore: renames file/function
* chore: improve req type safety in local operations, misc req.files replacements
* chore: misc type and fn export changes
* chore: ensures root routes take pass unmodified request to root routes
* chore: improve types
* chore: consolidates locale api req initialization (#4922)
* chore(next): overhauls field rendering strategy (#4924)
* chore(next): ssr array field (#4937)
* chore(next): ssr blocks field (#4942)
* chore(next): ssr upload field and document drawer (#4957)
* chore(next): wires form submissions (#4982)
* chore: api handler adjustments
* feat: adds graphql playground handler
* adds credentials include setting to playground
* remove old playground init, stub graphql handler location
* fix: allow for null fallbackLocale
* fix: correctly prioritize locales passed as null
* chore: move all graphql code into next package
* graphql changes
* chore: semi working version of graphql http layer
* gql fix attempts
* rm console log
* chore: partial gql changes
* chore: adds gql and gql-http back into payload
* chore: removes collection from req
* chore: separates graphql package out for schema generation
* chore: dep cleanup
* chore: move graphql handlers
* chore: removes unused deps
* chore(next): ssr list view (#5032)
* chore: refactor response handler order for custom endpoints
* chore: add back in condition for collection GET path with 2 slugs
* chore: rm optional chain
* chore: import sort route file
* chore: allows custom endpoints to attempt before erroring
* feat: adds memoization to translation functions (#5036)
* chore: fix APIError import
* chore: return attemptCustomEndpointBeforeError responses
* chore(next): properly instantiates table columns
* fix(next): attaches params to req and properly assigns prefs key (#5042)
* chore: reorganize next route order
* chore(next): adds RouteError handler to next routes
* chore: builds payload successfully
* chore: misc file omissions
* fix(ui): maintains proper column order
* fix(ui): ensures first cell is a link
* fix(next): properly copies url object in createPayloadRequest (#5064)
* fix(ui): bumps react-toastify to v10.0.4 to fix hydration warnings
* feat: add route for static file GET requests (#5065)
* chore(next): allows resolved config promise to be thread through initPage (#5071)
* chore(ui): conditionally renders field label from props
* feat(next): next install script
* chore: pass config to route handlers
* feat: initial test suite framework (#4929)
* chore(next): renderable account, api, and create first user views (#5084)
* fix(next): properly parses search params in find, update, and delete handlers (#5088)
* chore(next): ssr versions view (#5085)
* chore: adds homepage for scss testing
* chore: moves dev folder to top, establishes new test pattern
* chore: working turbopack
* chore: sets up working dynamic payload-config imports
* remove unused code
* chore: rm console log
* misc
* feat: correctly subs out ability to boot REST API within same process
* chore: WIP dev suites
* chore: removes need for REST_API folder in test dir
* removes duplicate bootAdminPanel fn
* misc
* specify default export
* chore: sets up jest to work with next/jest
* chore: progress to mongodb and sharp builds
* chore: passing community tests
* chore: sorta workin
* chore: adjust payload-config import
* chore: adds rest client for Next handlers
* chore: removes test garb
* chore: restores payload-config tsconfig path temporarily
* chore: establishes pattern for memory db during tests
* chore: bumps mongoose to 7
* chore(next): 404s on nested create urls
* chore: functional _community e2e
* chore: increases e2e expect timeout
* fix(next): sanitizes locale toString from client config
* chore: type fixes
* chore: pulls mongodb from main
* chore: uses graphql to log user in
* feat: passing auth test suite
* chore(ui): threads params through context and conditionally renders document tabs (#5094)
* feat(ui): adds params context (#5095)
* chore: removes unecessary memory allocation for urlPropertiesObject object
* chore: passing graphql test suite
* chore: removes references to bson
* chore: re-enables mongodb memory server for auth test suite
* chore: replace bson with bson-objectid
* feat: passing collections-rest int suite
* chore: fixes bad imports
* chore: more passing int suites
* feat: passing globals int tests
* feat: passing hooks int test suite
* chore: remove last express file
* chore: start live-preview int test migration
* chore: passing localization int tests
* passing relationships int tests
* chore: partial passing upload int tests
* chore: fixes scss imports
* chore(ui): renders document info provider at root (#5106)
* chore: adds schema path to useFieldPath provider, more passing tests
* chore: begins work to optimize translation imports
* chore: add translations to ui ts-config references
* chore: add exports folder to package json exports
* chore: adds readme how-to-use instructions
* chore: attempts refactor of translation imports
* chore: adds authentication:account translation key to server keys
* chore: finishes translation optimization
* chore: ignores warnings from mongodb
* chore(ui): renders live document title (#5115)
* chore(ui): ssr document tabs (#5116)
* chore: handles redirecting from login
* chore: handle redirect with no searchParams
* chore: handle missing segments
* chore(next): migrates server action into standalone api endpoint (#5122)
* chore: adjust dashboard colection segments
* test: update e2e suites
* fix(ui): prevents unnecessary calls to form state
* chore: fix finding global config fields from schema path
* fix(next): executes root POST endpoints
* chore(ui): ignores values returned by form state polling
* chore: scaffolds ssr rte
* chore: renders client leaves
* chore: server-side rendered rich text elements
* chore: defines ClientFunction pattern
* chore(ui): migrates relationship field
* chore: adds translations, cleans up slate
* chore: functional slate link
* chore: slate upload ssr
* chore: relationship slate ssr
* chore: remaining slate ssr
* chore: fixes circular workspace dep
* chore: correct broken int test import paths
* chore: remove media files from root
* chore: server renders custom edit view
* fix(ui): resolves infinite loading in versions view
* fix(next): resolves global edit view lookup
* chore: payload builds
* chore: delete unused files
* chore: removes local property from payload
* chore: adds mongodb as dev dep in db-mongodb package
* chore: hide deprecation warnings for tempfile and jest-environment-jsdom
* chore: remove all translations from translations dist
* chore: clean ts-config files
* chore: simple type fixes
* chore(ui): server renders custom list view
* chore: fix next config payload-config alias
* chore: adds turbo alias paths
* chore: adjusts translation generation
* chore: improve auth function
* chore: eslint config for packages/ui
* chore(ui): exports FormState
* chore(next): migrates account view to latest patterns
* chore: disable barbie mode
* chore(ui): lints
* chore(next): lints
* chore: for alexical
* chore: custom handler type signature adjustment
* fix: non-boolean condition result causes infinite looping (#4579)
* chore(richtext-lexical): upgrade lexical from v0.12.5 to v0.12.6 (#4732)
* chore(richtext-lexical): upgrade all lexical packages from 0.12.5 to 0.12.6
* fix(richtext-lexical): fix TypeScript errors
* fix indenting
* feat(richtext-lexical): Blocks: generate type definitions for blocks fields (#4529)
* feat(richtext-lexical)!: Update lexical from 0.12.6 to 0.13.1, port over all useful changes from playground (#5066)
* feat(richtext-lexical): Update lexical from 0.12.6 to 0.13.1, port over all useful changes from playground
* chore: upgrade lexical version used in monorepo
* chore: remove the 3
* chore: upgrade nodemon versions (#5059)
* feat: add more options to addFieldStatePromise so that it can be used for field flattening (#4799)
* feat(plugin-seo)!: remove support for payload <2.7.0 (#4765)
* chore(plugin-seo): remove test script from package.json (#4762)
* chore: upgrade @types/nodemailer from v6.4.8 to v6.4.14 (#4733)
* chore: revert auth and initPage changes
* chore(next): moves edit and list views (#5170)
* fix: "The punycode module is deprecated" warning by updating nodemailer
* chore: adjust translations tsconfig paths in root
* chore: fix merge build
---------
Co-authored-by: Jarrod Flesch <jarrodmflesch@gmail.com>
Co-authored-by: Jacob Fletcher <jacobsfletch@gmail.com>
Co-authored-by: Jarrod Flesch <30633324+JarrodMFlesch@users.noreply.github.com>
Co-authored-by: Elliot DeNolf <denolfe@gmail.com>
Co-authored-by: James <james@trbl.design>
Co-authored-by: Alessio Gravili <alessio@gravili.de>
Co-authored-by: Alessio Gravili <70709113+AlessioGr@users.noreply.github.com>
* fix(richtext-lexical): make sure block fields are wrapped in a uniquely-named group
* chore: remove redundant hook
* chore(richtext-lexical): attempt to fix unnecessary unsaved changes warning regression
* cleanup everything
* chore: more cleanup
* debug
* looks like properly cloning the formdata for setting initial state fixes the issue where the old formdata is updated even if node.setFields is not called
* chore: fix e2e tests
* chore: fix e2e tests (a selector has changed)
* chore: fix int tests (due to new blocks data format)
* chore: fix incorrect insert block commands in drawer
* chore: add new e2e test
* chore: fail e2e tests when there are browser console errors
* fix(breaking): beforeInput and afterInput: fix missing key errors, consistent typing and cases in name
